OCHYIT Jumper Cables Compatible with 18V M18 Batteries with Fuse Switch Battery Adapter, 1FT 10AWG Mil.Waukee Jump Starter Automotive Booster Cables for Car Jump Starting Using Tool - Posted 125 days ago

 

Features / Benefits

Compatible Mil.waukee M18 Batteries: This M18 battery jumper cable is compatible with Mil.waukee 18V batteries, specifically models: 4811-1820/4811-1865/4811-1850/4811-1862. When connected to a battery, this car jumper cables can start most motorcycles, cars, and SUVs. (Note: This package contains only one cable with an adapter, switch and 30A fuse. It does not include a Mil.waukee battery.)
Safety Protection, High Conductivity: This battery adapter utilises 10AWG tinned copper wiring with a silicone rubber sheath, offering excellent conductivity while resisting breakage and deformation. The boat-shaped switch on the jump starter cable enables control when connecting circuits, and the included 30A fuse prevents damage to battery equipment from excessive power, ensuring a safer ignition process throughout
Portable and User-friendly Design: Measuring just 1FT in length, this Mil.waukee m18 battery adapter is convenient to use and easily stored in toolkits or vehicles without taking up excessive space. Furthermore, as this battery jumper adapter enables self-rescue by starting vehicles via a Mil.waukee battery using the m18 jumper cable, it resolves the challenge of waiting for assistance when vehicles break down in remote outdoor areas
Wide Application: This Mil.waukee battery jumper cables adapter is suitable for both indoor and outdoor. It can serve as a battery jumper for emergency starting of small vehicles with low battery charge, such as UTVs,SUVs. It also functions as a power connector for children\'s electric ride-on toys, DIY remote-controlled toy cars,robots. Furthermore,it can be utilised as a power connector for emergency lights. (Tipes: When starting a vehicle,the battery charge level should ideally be above 50%.)
Notes: 1. Do not reverse the operating sequence, use the m18 jump starter carefully to avoid overloading. 2. Do not connect for extended periods. After successful ignition, disconnect cables within 30 seconds to mitigate safety risks.If ignition fail, wait at least 3 minutes before retrying. 3. This Milwaukee battery adapter is not a charger, only directly outputs voltage and power from the battery without altering or reducing voltage. It serves solely as an emergency vehicle jump-start solution